HONDA 
 
Programming of Infra Red remote controls.
 
NOTE : Maximum of 3 can be programmed.
 
NOTE : Please ensure time delays are maintained, otherwise procedure will not
be completed correctly.
 
1. Turn ignition ON.

2. Within 4 seconds push the transmitter button aiming the transmitter at the
receiver unit above the rear view mirror.

3. Within 4 second turn ignition OFF.

4. For additional remote controls repeat steps 1 to 4 within 4 seconds of pro-
gramming the last remote control.

5. Turn ignition ON.

6. Within 4 seconds push the transmitter button aiming the transmitter at the
receiver unit above the rear view mirror.

7. The door actuator should operate.

8. Within 8 seconds aim the first remote control at the receiver and press the
transmitter button.

9. The door actuator should operate.

10. Within 8 seconds aim the second remote control at the receiver and press
the transmitter button.

11. The door actuator should operate.

12. Within 8 seconds aim the third remote control at the receiver and press the
transmitter button.

13. Turn ignition OFF, and remove key.

14. Confirm all remote controls operate.

Additions: Honda Key Remote Control Plip Fob (also known as Zapper) Reprogramming and Programming Free Instructions