If you find this site useful why not Tweet it?

Remotes can be programmed manually as follows:
1. In drivers kick panel there is 2 white service connectors for Central Locking, these have black and black/blue wires in them and are male/female connectors with blade terminals. 

2. Connect the C/L service connectors together and with the car unlocked and the door shut, press the unlock nutton followed by the lock button on the remote- the doors should lock and unlock to confirm remote regisatration process. 

3. Repeat operation for all remotes then remove service connector to close the system.
Note- all keys must be present at the time of coding to prevent them being deleted


Additions: Subaru Key Remote Control Plip Fob (also known as Zapper) Reprogramming and Programming Free Instructions