If you find this site useful why not Tweet it?
 
 


 
VOLVO
 
440/460
 
1. In the under bonnet diagnostic socket, connect fly lead to terminal 1 lock and unlock the vehicle using existing remote

2. Switch ignition on

3. Press test button on the diagnostic socket 4 times, LED illuminates

4. Press button 3 times, then 4 times and then 4 times again

5. Press the unlock button on the first remote

6. Repeat programming procedure for additional remotes. 4 remotes maximum
 
 
850/940/960
 
1. Sit in the vehicle with all doors closed.

2. Turn the ignition key off and on four times (not to start position, but the on position) and on the fifth time leave in the on position.

3. Press the remote lock/unlock button several times (if there is a dashboard mounted LED come on for 2 seconds and then it should flash for ten seconds) to synchronise the remote to the control unit. Repeat for additional remotes.

4. Switch off the ignition and test the remotes. 4 remotes maximum
 
S/V 90
 
1. Sit in the vehicle with all doors closed.

2. Turn the ignition key off and on five times (not to start position, but the on position) and on the fifth time leave in the on position.

3. Press the remote lock/unlock button several times (if there is a dashboard mounted LED come on for 2 seconds and then it should flash for ten seconds) to synchronise the remote to the control unit. Repeat for additional remotes.

4. Switch off the ignition and test the remotes. 4 remotes maximum

 

Additions: Volvo Key Remote Control Plip Fob (also known as Zapper) Reprogramming and Programming Free Instructions